Komplet razdelilnik/zbiralnik z uravnotežilno enoto EQUIFLUID IVAR.GBC 01 SET – 1" × EK, 50–300 mbar, 4-potni
Koda: 550170S4Podroben opis izdelka
Razdelilnik s samodejnim uravnavanjem tlaka
IVAR.GBC 01 SET združuje 4-cestný nerjavni razdelilnik/zbiralnik IVAR.CI 589 CVP (503204C) in uravnotežilno enoto EQUIFLUID (550170) v en sam sklop. Regulator diferenčnega tlaka se montira neposredno na razdelilnik in s pomočjo membrane in vzmeti reagira na tlačne nihanje v ogrevalnem sistemu. Krogi tako dobivajo pretok blizu načrtovanemu tudi takrat, ko termostatski ventili, conski pogoni ali drugi krogi spreminjajo odjem.
Kaj vsebuje komplet?
- nerjavni razdelilnik s pretokom 0–2,5 l/min (regulacija, zapiranje in zaklep nastavitve)
- nerjavni zbiralnik z zapornimi ventili z ročnimi glavami, pripravljen za elektrotermične glave (M 30 × 1,5)
- enoto EQUIFLUID: glavni ventil na povratni veji, partnerski ventil na dovodu, kapilaro 1,5 m, termometer, avtomatski odzračevalni in napajalni/praznilni ventil
- montažne konzole in čep
Nastavitev in montaža
Željeni diferenčni tlak se nastavi z regulacijsko glavo glavnega ventila v območju 50–300 mbar; s partnerskim ventilom se omeji maksimalni pretok (statsko uravnoteženje). Glavni ventil mora biti na povratni veji in dostopen, upoštevajte smer pretoka, označen na telesu. Pred zagonom sistem temeljito sperite. Komplet se prilega inštalacijski omari IVAR.P-KLASIK (podometna) ali IVAR.N-KLASIK (nadometna) velikosti 3. Toplotno izolacijo enote EQUIFLUID (506184, tip AGBC 11) lahko naročite posebej.
Tehnični parametri
| Koda | 550170S4 |
| Proizvajalec | IVAR |
| Vrsta | IVAR.GBC 01 SET |
| Število izhodov | 4 |
| Priključki / izhodi | 1" / 3/4" EK |
| Razpon nastavitve Δp | 50–300 mbar |
| Največji obratovalni tlak | PN 10 |
| Največja obratovalna temperatura | +90 °C |
| Merilniki pretoka | 0–2,5 l/min |
| EQUIFLUID KW enote | 6,8 |
| Dolžina kapilare | 1,5 m |
| Delovno sredstvo | voda, mešanica vode in glikola 30 % |
| Material | nerjavna jekla AISI 304, medenina CW617N/CW602N, EPDM, PA6 + 30 % GF |
| Inštalacijska omara | P3 / N3 (KLASIK) |
Pogosta vprašanja
Na katero vejo spada glavni ventil EQUIFLUID?
Glavni ventil se montira na povratno vejo, partnerski ventil na dovodno; povezuje jih kapilara dolga 1,5 m. Glavni ventil mora ostati dostopen zaradi nastavljanja in merjenja.
Kako se nastavi zahtevana tlačna razlika?
S partnerskim ventilom se najprej nastavi pretok, nato se izmeri tlačna razlika med partnerskim in glavnim ventilom. Na izmerjeno vrednost se nastavi krmilna glava glavnega ventila v območju 50–300 mbar.
V katero vgradno omarico se sestava prilega?
Za 4-potno sestavo proizvajalec navaja omarico velikosti 3: IVAR.P-KLASIK 3 za vgradnjo pod omet ali IVAR.N-KLASIK 3 za vgradnjo nad omet. Omara ni del dobave.
Ali je toplotna izolacija vključena v dobavo? Ne. Toplotno izolacijo enote EQUIFLUID lahko naročite pod kodo 506184 (tip AGBC 11).
Dodatni parametri
| Kategorija: | IVAR razdelilniki brez črpalke |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Šifra: | 550170S4 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.GBC 01 SET |
| Število izhodov: | 4 |
| Priključek / izhodi: | 1" / 3/4" EK |
| Območje nastavitve Δp: | 50–300 mbar |
| Najv. delovni tlak: | PN 10 |
| Najv. delovna temperatura: | +90 °C |
| Merilniki pretoka: | 0–2,5 l/min |
| Kv enote EQUIFLUID: | 6,8 |
| Dolžina kapilare: | 1,5 m |
| Delovni medij: | voda, mešanica vode in glikola 30 % |
| Material: | nerjavno jeklo AISI 304, medenina CW617N/CW602N, EPDM, PA6 + 30 % GF |
| Vgradna omarica: | P3 / N3 (KLASIK) |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.