Eshop roka 2025 s vykurovacou technikou

Koleno PRESS 90° PPSU z enim vtičnim koncem IVAR.KZ PPSU – 20 × 20 mm

Koda: 82820220
Ni ocenjeno Podrobnosti o ocenjevanju
7,45 € –20 %
Koleno PRESS 90° PPSU s jedným zásuvným koncom IVAR.KZ PPSU – 20 × 20 mm
7,45 € –20 % 5,96 € / kos 4,85 € brez DDV Cena mere:
Mednarodna dostava
Po naročilu (1-2 tedna)

Podrobne informacije

Podroben opis izdelka

Koleno PRESS 90° PPSU z enim vtičnim koncem IVAR.KZ PPSU 20 × 20 mm (82820220) v majhnem prostoru poveže dva fitinga za stiskanje. Namenjeno je večplastnim cevem ALPEX, TURATEC in PEX enakega premera 20 mm ter se uporablja v razvodih pitne vode in ogrevanja.

Podatki proizvajalca

  • delovni tlak PN 10, temperaturno območje od +3 °C do +95 °C
  • material: telo iz PPSU (polifenilsulfon), stisna objemka iz nerjavnega jekla AISI 304, O-obroč EPDM, zaporni obroč iz polikarbonata
  • radialno stiskanje s čeljustmi B/F Ø 20 mm
  • mere po tehničnem listu: L1 = 39 mm, L2 = 42 mm, Z1 = 14 mm, teža 17 g
  • higienski atest za pitno vodo (po podatkih proizvajalca)

Montaža

Pri montaži upoštevajte navodila proizvajalca za spajanje večplastnih cevi ALPEX, TURATEC in PEX s fitingi za stiskanje IVAR.PRESS. Če spoj ni stisnjen, pri tlačnem preizkusu v območju od 1 do 6,5 bar pušča, zato se izostanek stiskanja pokaže z uhajanjem vode.

Tehnični podatki

Koda82820220
ProizvajalecIVAR
TipIVAR.KZ PPSU
Vrsta izdelkaKoleno PRESS 90° PPSU z enim vtičnim koncem
Dimenzija20 × 20 mm
Cevi za priključitevALPEX, TURATEC, PEX (enak premer)
MaterialPPSU, objemka nerjavno jeklo AISI 304, O-obroč EPDM
Najv. tlakPN 10
Temperatura+3 do +95 °C
Čeljusti za stiskanjeB/F Ø 20 mm
Mera L1 / L2 / Z139 / 42 / 14 mm
Teža17 g

Pogosta vprašanja

Za katere cevi se uporablja 82820220?
Za večplastne cevi ALPEX, TURATEC in PEX enakega premera 20 mm.

Kaj pomeni „en vtični konec“?
Koleno v majhnem prostoru poveže dva fitinga za stiskanje; en njegov konec je vtični.

Ali je spoj brez stiskanja tesen?
Ne, nestisnjen spoj pri tlačnem preizkusu v območju od 1 do 6,5 bar pušča, s čimer se pozabljeno stiskanje razkrije.

Dodatni parametri

Kategorija: kolena press 90° - PPSU
Garancija: 2 leti
Teža: 0.017 kg
Koda: 82820220
Proizvajalec: IVAR
Tip: IVAR.KZ PPSU
Vrsta izdelka: Koleno PRESS 90° PPSU z enim vtičnim koncem
Dimenzija: 20 × 20 mm
Cevi za priključitev: ALPEX, TURATEC, PEX (enak premer)
Material: PPSU, objemka nerjavno jeklo AISI 304, O-obroč EPDM
Najv. tlak: PN 10
Temperatura: +3 do +95 °C
Čeljusti za stiskanje: B/F Ø 20 mm
Mera L1 / L2 / Z1: 39 / 42 / 14 mm
Teža: 17 g

Ocena izdelka

Bodite prvi, ki bo objavil članek k tej postavki!

Tega polja ne izpolnite

Kako bi ocenili ta izdelek? Izberite od 1 do 5 zvezdic, pri čemer je 1 najslabša in 5 najboljša ocena.

Razprava

Bodite prvi, ki bo objavil članek k tej postavki!

Tega polja ne izpolnite

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.