IVAR.OSMO SL 800 – stenski fancoil, dvocevna izvedba – AKCIJA
Koda: FAOL08SC1IIPodroben opis izdelka
IVAR.OSMO SL 800 je stenski dvocevni fancoil za ogrevanje in hlajenje notranjih prostorov. Montira se navpično na steno na poljubni višini, zrak vsesava spredaj, zaradi majhne globine pa je primeren tudi za ozke prostore. Ventilator poganja varčen motor s tehnologijo DC Inverter.
Podatki za model SL 800
- grelna moč 3,81 kW (voda 45/40 °C, zrak 20 °C)
- hladilna moč 3,30 kW (voda 7/12 °C, zrak 27 °C)
- mere 1280 × 580 × 119 mm, teža 20,0 kg
- prostornina vode v izmenjevalniku 1,46 l, najvišji delovni tlak 10 bar
- hidravlični priključek 3/4" EK, standardno na levi strani
Regulacija in vzdrževanje
Daljinski upravljalnik je priložen, regulacijo (na primer LCD regulacijo IVAR.844) pa je treba naročiti posebej. Zračni filter je mogoče enostavno odstraniti in očistiti. Priključitev na vodo in elektriko prepustite strokovnemu podjetju.
Tehnični podatki
| Koda | FAOL08SC1II |
| Znamka | IVAR |
| Tip | IVAR.OSMO SL 800 |
| Mere (Š × V × G) | 1280 × 580 × 119 mm |
| Teža | 20,0 kg |
| Grelna moč (voda 45/40 °C) | 3,81 kW |
| Hladilna moč (voda 7/12 °C) | 3,30 kW |
| Prostornina vode v izmenjevalniku | 1,46 l |
| Najvišji pretok zraka | 567 m³/h |
| Najvišji delovni tlak | 10 bar |
| Priključek | 3/4" EK |
| Montaža | stenska, navpično |
Pogosta vprašanja
Ali je treba k fancoilu IVAR.OSMO SL 800 dokupiti regulacijo?
Da. Daljinski upravljalnik je priložen, regulacijo, na primer LCD regulacijo IVAR.844, pa je treba naročiti posebej.
Kam je mogoče namestiti IVAR.OSMO SL 800?
Navpično na steno na poljubni višini. Naprava je globoka le 119 mm in zrak vsesava spredaj.
Ali ga lahko uporabimo za ogrevanje in hlajenje?
Da, gre za dvocevno izvedbo. Pri navedenih temperaturah vode in zraka doseže 3,81 kW pri ogrevanju in 3,30 kW pri hlajenju.
Dodatni parametri
| Kategorija: | Ventilatorski konvektorji - naprave |
|---|---|
| Garancija: | 2 leti |
| Teža: | 20 kg |
| Koda: | FAOL08SC1II |
| Znamka: | IVAR |
| Tip: | IVAR.OSMO SL 800 |
| Mere (Š × V × G): | 1280 × 580 × 119 mm |
| Teža: | 20,0 kg |
| Grelna moč (voda 45/40 °C): | 3,81 kW |
| Hladilna moč (voda 7/12 °C): | 3,30 kW |
| Prostornina vode v izmenjevalniku: | 1,46 l |
| Najvišji pretok zraka: | 567 m³/h |
| Najvišji delovni tlak: | 10 bar |
| Priključek: | 3/4" EK |
| Montaža: | stenska, navpično |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
