Impulzni vodomer IVAR.IVLI DRY z navojem, suhi številčnik – 6/4" ZN, konektor Hirschmann
Koda: 120.090.40APodroben opis izdelka
IVAR.IVLI DRY s kodo 120.090.40A meri porabo vode in hkrati pošilja impulze o trenutnem pretoku. Zato lahko krmili sorazmerno doziranje črpalk IVAR.DOSAMATIC PPI A in PPI X5MA, na katere se priključi s povezovalnim kablom s konektorjem Hirschmann dolžine približno 3 m. Gre za navojno izvedbo s suhim številčnikom, certifikatom MID in merilnim območjem R80.
Podatki za dimenzijo 6/4"
- priključek 6/4" zunanji navoj, DN 40
- največji pretok 20 m³/h, nazivni 10 m³/h, najmanjši 200 l/h
- tlačni razred PN 16
- temperatura vode 5–40 °C, okolice 5–50 °C
- dolžine po tehnični risbi L = 300 mm, l = 440 mm
Impulzni izhod
Tehnični list navaja 4 impulze na vsak pretečeni liter vode; opis proizvajalca pri večjih dimenzijah omenja tudi 1 impulz na 10 litrov. Pred nastavitvijo dozirne črpalke zato preverite, s katerim številom impulzov deluje vaš vodomer.
Serija IVLI DRY se izdeluje v dimenzijah 1/2", 3/4", 1", 5/4", 6/4" in 2". Vgradnjo v vodovodno napeljavo naj opravi inštalater.
Tehnični podatki
| Koda | 120.090.40A |
| Znamka | IVAR |
| Tip | IVAR.IVLI DRY |
| Izvedba | navojna, suhi številčnik |
| Priključek | 6/4" ZN, DN 40 |
| Največji pretok | 20 m³/h |
| Nazivni pretok | 10 m³/h |
| Najmanjši pretok | 200 l/h |
| Tlačni razred | PN 16 |
| Temperatura vode / okolice | 5–40 °C / 5–50 °C |
| Certifikat | MID, merilno območje R80 |
| Kabel | pribl. 3 m, konektor Hirschmann |
| Dolžina L / l | 300 / 440 mm |
Pogosta vprašanja
S katerimi dozirnimi črpalkami vodomer deluje?
S črpalkami IVAR.DOSAMATIC PPI A in PPI X5MA, na katere se priključi s kablom s konektorjem Hirschmann. Kabel je dolg približno 3 m.
Koliko impulzov daje vodomer?
Tehnični list navaja 4 impulze na liter, opis proizvajalca pri večjih dimenzijah tudi 1 impulz na 10 litrov. Pred nastavitvijo črpalke vrednost preverite.
Kolikšen pretok zmore vodomer 6/4"?
Nazivno 10 m³/h in največ 20 m³/h; najmanjši pretok po tehničnem listu je 200 l/h.
Dodatni parametri
| Kategorija: | dozirne črpalke |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | dozirnik / črpalka |
| Koda: | 120.090.40A |
| Znamka: | IVAR |
| Tip: | IVAR.IVLI DRY |
| Izvedba: | navojna, suhi številčnik |
| Priključek: | 6/4" ZN, DN 40 |
| Največji pretok: | 20 m³/h |
| Nazivni pretok: | 10 m³/h |
| Najmanjši pretok: | 200 l/h |
| Tlačni razred: | PN 16 |
| Temperatura vode / okolice: | 5–40 °C / 5–50 °C |
| Certifikat: | MID, merilno območje R80 |
| Kabel: | pribl. 3 m, konektor Hirschmann |
| Dolžina L / l: | 300 / 440 mm |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.