Hidravlična kretnica za vodoravni distribucijski razdelilnik IVAR.HS 325
Koda: IVA49043694Podroben opis izdelka
Kretnica IVAR.HS 325 (IVA49043694) hidravlično izenačuje dinamične tlake med primarnim in sekundarnim krogom, kadar ima sistem več virov toplote ali več ogrevalnih krogov. Namenjena je vodoravnemu razdelilniku IVAR.HC-DN 65. Ločilni deflektor zagotavlja plastenje vode, izločanje zraka in nečistoč ter usedanje blata; nizka hitrost v glavni komori omejuje mešanje ogrevalne vode.
Tehnični podatki
- Maks. moč (pri ΔT 20 K): 1 600 kW
- Maks. pretok: 70 000 l/h
- Premer kretnice: 325 mm
- Maks. delovni tlak: 10 bar
- Maks. delovna temperatura: 100 °C
- Toplotna izolacija: Trocellen C080 RN2, debelina 30 mm
- Material: jeklo Fe EN 10217-1
Naprava je predvidena za zaprte ogrevalne in hladilne kroge, dobavlja se s telesom in toplotno izolacijo. Talni nosilec, protiprirobnice in komplet vijakov se naročijo posebej. Vgradnjo in zagon zaupajte strokovnemu podjetju.
Tehnični podatki
| Koda | IVA49043694 |
| Proizvajalec | IVAR |
| Tip | IVAR.HS 325 |
| Maks. moč (pri ΔT 20 K) | 1 600 kW |
| Maks. pretok | 70 000 l/h |
| Premer kretnice | 325 mm |
| Maks. delovni tlak | 10 bar |
| Maks. delovna temperatura | 100 °C |
| Toplotna izolacija | Trocellen C080 RN2, debelina 30 mm |
| Material | jeklo Fe EN 10217-1 |
Pogosta vprašanja
Kolikšno moč in pretok zmore kretnica?
Do 1 600 kW pri ΔT 20 K in 70 000 l/h; največji delovni tlak je 10 bar, temperatura pa +100 °C.
S katerim razdelilnikom se kretnica uporablja?
Namenjena je vodoravnemu razdelilniku IVAR.HC-DN 65 (DN 65 po imenu izdelka).
Dodatni parametri
| Kategorija: | hidravlične kretnice |
|---|---|
| Garancija: | 2 leti |
| Koda: | IVA49043694 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.HS 325 |
| Maks. moč (pri ΔT 20 K): | 1 600 kW |
| Maks. pretok: | 70 000 l/h |
| Premer kretnice: | 325 mm |
| Maks. delovni tlak: | 10 bar |
| Maks. delovna temperatura: | 100 °C |
| Toplotna izolacija: | Trocellen C080 RN2, debelina 30 mm |
| Material: | jeklo Fe EN 10217-1 |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
