Filtracijska vložka IVAR.BIG BLUE 4,5 × 10" – 40 µm, granulirani aktivni ogljik – AKCIJA
Koda: ESCHV4510ECOPodroben opis izdelka
Vložka ESCHV4510ECO je zamenljiv filtrirni element za filter IVAR.BIG BLUE ESFPV4510ECO s dimenzijami 4,5 × 10" in priključkom 1" F. Vsebuje polnilo iz granuliranega aktivnega oglja z poroznostjo 40 µm. Aktivno oglje je v seriji IVAR.BIG BLUE izbira za primere, ko je poleg nečistoč potrebno izboljšati tudi okus in vonj vode.
- dimenzija 4,5 × 10", poroznost 40 µm
- material: polnilo iz granuliranega aktivnega oglja
- za hladno vodo s temperaturo +5 do +40 °C
Življenjska doba vložke je odvisna od kakovosti vhodne vode in pogostosti uporabe – praviloma se zamenja po 2 do 6 mesecih, po potrebi pa glede na vodomer. Proizvajalec priporoča samo originalne vložke, pri uporabi vložk drugih proizvajalcev pa garancija za filter preneha. Pri zamenjavi zaprite dovod, sprostite tlak s pipo za filtrom, posodo odvijte s ključem, jo operite in pred ponovno privijanjem preverite O-obroč.
Tehnični parametri
| Koda | ESCHV4510ECO |
| Proizvajalec | IVAR |
| Vrsta | IVAR.BIG BLUE |
| Vrsta | filtracijska vložka |
| Velikost | 4,5 × 10" |
| Poroznost | 40 µm |
| Material | polnilo iz granuliranega aktivnega oglja |
| Določitev | filter IVAR.BIG BLUE ESFPV4510ECO (1" F) |
| Temperatura vode | +5 do +40 °C |
| Razmik zamenjave | običajno 2–6 mesecev |
Pogosta vprašanja
V katero vložko filter ustreza?
V filter IVAR.BIG BLUE 4,5 × 10" s priključkom 1" F, koda ESFPV4510ECO.
Kako pogosto je treba vložko zameniti?
Odvisno od kakovosti vode običajno po 2 do 6 mesecih. Življenjska doba je odvisna od onesnaženosti vhodne vode in od tega, kako pogosto se filter uporablja.
Kako se vložka zamenja?
Zaprite dovod vode, s pipo za filtrom sprostite tlak in posodo odvijte z montažnim ključem. Posodo in glavo operite, vstavite novo vložko, vstavite O-obroč v utor in posodo privijte z roko.
Dodatni parametri
| Kategorija: | filtrski vložki - FP3, BIG |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | ESCHV4510ECO |
| Proizvajalec: | IVAR |
| Tip: | IVAR.BIG BLUE |
| Vrsta: | filtrski vložek |
| Velikost: | 4,5 × 10" |
| Poroznost: | 40 µm |
| Material: | polnilo iz granuliranega aktivnega oglja |
| Namen: | filter IVAR.BIG BLUE ESFPV4510ECO (1" NN) |
| Temperatura vode: | +5 do +40 °C |
| Interval menjave: | običajno 2–6 mesecev |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.