Filter 9 3/4" IVAR.FP3.TRIPLEX – 1" NN, z vložki, vključno z granuliranim aktivnim ogljem – AKCIJA
Koda: IVAA1131025GACPodroben opis izdelka
IVAR.FP3.TRIPLEX (koda IVAA1131025GAC) je tridelni filter velikosti 9 3/4", v katerem voda zaporedoma teče skozi tri filtrirne stopnje. Zadrži mehanske nečistoče, kot so pesek, ostružki ali drobni delci korozije, in je primeren tudi za končno fino filtracijo deževnice. Ta izvedba se dobavlja z vložki, med katerimi je tudi stopnja z granuliranim aktivnim ogljem.
Priloženi vložki
- RL-A – 80 µm
- GAC40 – 40 µm, granulirano aktivno oglje
- FR-N – 20 µm, PP melt-blown
Tehnični podatki
- priključek vstop/izstop 1" NN, največji delovni pretok 3,6 m³/h
- tlačni razred PN 10, temperatura vode +5 do +40 °C
- mere 396 × 365 × 145 mm, ohišje iz SAN, glava iz PP
Montaža in vzdrževanje
- vgradnjo naj opravi usposobljen inštalater; pri tlaku v omrežju nad 8 barov je potreben reducirni ventil
- v sistemu brez raztezne posode je treba pred filter vgraditi izravnalno tlačno posodo s prostornino vsaj 2 l
- pred filtrom in za njim priporočamo manometer – pri razliki tlaka nad 0,5 bara vložek očistite ali zamenjajte
- upoštevajte smer pretoka po puščici, filter pritrdite in ga zaščitite pred zmrzaljo in neposrednim soncem
Pri menjavi se vložek najprej vstavi v posodo, posoda se namesti na glavo in z roko privije s holandsko matico. Za odvijanje matic je namenjen ključ IVAAVAFP3. Kot nadomestni so primerni vložki FR-N, F-A, RLA, AC-HT, GAC40 in CTO-E. Izvedba IVAA1131025K se dobavlja z vložki 250, 80 in 20 µm.
Tehnični podatki
| Koda | IVAA1131025GAC |
| Proizvajalec | IVAR |
| Tip | IVAR.FP3.TRIPLEX |
| Vrsta | tridelni filter mehanskih nečistoč |
| Velikost | 9 3/4" |
| Priključek | 1" NN |
| Najv. delovni pretok | 3,6 m³/h |
| Tlačni razred | PN 10 |
| Temperatura vode | +5 do +40 °C |
| Mere | 396 × 365 × 145 mm |
| Material | ohišje SAN, glava PP |
| Priloženi vložki | RL-A 80 µm, GAC40 40 µm, FR-N 20 µm |
Pogosta vprašanja
Kateri vložki so v filtru?
Filter se dobavlja s tremi vložki: RL-A s poroznostjo 80 µm, GAC40 z granuliranim aktivnim ogljem (40 µm) in FR-N iz PP melt-blown s poroznostjo 20 µm.
Kdaj je treba vložke očistiti ali zamenjati?
Priporočljivo je vgraditi manometer pred filtrom in za njim. Ko razlika tlaka preseže 0,5 bara, je treba vložek očistiti ali zamenjati.
Na kaj paziti pri montaži?
Pri tlaku v omrežju nad 8 barov pred filter vgradite reducirni ventil. Če v sistemu ni raztezne posode, pred filter vgradite izravnalno tlačno posodo s prostornino vsaj 2 l.
Katere druge vložke je mogoče uporabiti?
V filter ustrezajo vložki tipov FR-N, F-A, RLA, AC-HT, GAC40 in CTO-E. Za odvijanje matic služi montažni ključ IVAAVAFP3.
Dodatni parametri
| Kategorija: | filtri za pitno vodo |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | vodni filter |
| Velikost navoja: | 1" |
| Velikost filtra / vložke: | 10" |
| Koda: | IVAA1131025GAC |
| Proizvajalec: | IVAR |
| Tip: | IVAR.FP3.TRIPLEX |
| Vrsta: | tridelni filter mehanskih nečistoč |
| Velikost: | 9 3/4" |
| Priključek: | 1" NN |
| Najv. delovni pretok: | 3,6 m³/h |
| Tlačni razred: | PN 10 |
| Temperatura vode: | +5 do +40 °C |
| Mere: | 396 × 365 × 145 mm |
| Material: | ohišje SAN, glava PP |
| Priloženi vložki: | RL-A 80 µm, GAC40 40 µm, FR-N 20 µm |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.