Elektrohidravlična stiskalnica IVAR.MINI-PRESS 22V ACC – akumulator 21,6 V / 2,5 Ah ali 230 V, brez čeljusti
Koda: 578014Podroben opis izdelka
IVAR.MINI-PRESS 22V ACC (koda 578014) je kompaktna elektrohidravlična stiskalnica za spoje vseh običajnih sistemov stiskalnih fitingov na jeklenih, nerjavnih, bakrenih, plastičnih in večplastnih ceveh premera od 10 do 40 mm (3/8"–1 1/4").
Lastnosti
- sila stiskanja 22 kN, prisilni hod – stiskanje se vedno izvede do konca
- vrtljiva glava in vgrajena LED luč
- Li-Ion akumulator 21,6 V / 2,5 Ah, ki omogoča 50 % več stiskov kot akumulatorji 14,4 V
- možnost napajanja iz omrežja 230 V prek napajalnika 230 V / 21,6 V (koda 571567)
- masa 2,5 kg, mere 273 × 260 × 75 mm
Paket
Stiskalnica je dobavljena v kovčku skupaj z akumulatorjem in hitrim polnilnikom. Stiskalne čeljusti niso priložene, izberejo se glede na sistem in dimenzijo cevi. Dodatni akumulator 21,6 V / 2,5 Ah ima kodo 571571.
Stiskalnica in akumulator delujeta pri temperaturi od -10 °C do +60 °C, hitri polnilnik od 0 °C do +40 °C; shranjevati ju je treba pri temperaturi nad 0 °C.
Tehnični podatki
| Koda | 578014 |
| Znamka | IVAR |
| Tip | IVAR.MINI-PRESS 22V ACC |
| Napajanje | Li-Ion akumulator 21,6 V / 2,5 Ah ali omrežni napajalnik 230 V |
| Sila stiskanja | 22 kN |
| Območje cevi | Ø 10–40 mm (3/8"–1 1/4") |
| Masa | 2,5 kg |
| Mere | 273 × 260 × 75 mm |
| Obratovalna temperatura | -10 °C do +60 °C |
| Vsebina paketa | kovček, akumulator, hitri polnilnik |
| Stiskalne čeljusti | niso priložene |
Pogosta vprašanja
Ali so v paketu stiskalne čeljusti?
Ne. Paket vsebuje stiskalnico, akumulator 21,6 V / 2,5 Ah, hitri polnilnik in kovček, čeljusti pa se dokupijo glede na sistem, ki ga stiskate.
Ali lahko stiskalnico uporabljam brez akumulatorja?
Da, prek napajalnika 230 V / 21,6 V (koda 571567) jo lahko napajate neposredno iz omrežja. Napajalnik se prodaja posebej.
Za katere cevi je stiskalnica primerna?
Za običajne sisteme stiskalnih fitingov na jeklenih, nerjavnih, bakrenih, plastičnih in večplastnih ceveh premera od 10 do 40 mm.
Dodatni parametri
| Kategorija: | elektrohidravlične stiskalnice |
|---|---|
| Garancija: | 2 leti |
| Teža: | 2.5 kg |
| Vrsta: | stiskalnica (naprava) |
| Koda: | 578014 |
| Znamka: | IVAR |
| Tip: | IVAR.MINI-PRESS 22V ACC |
| Napajanje: | Li-Ion akumulator 21,6 V / 2,5 Ah ali omrežni napajalnik 230 V |
| Sila stiskanja: | 22 kN |
| Območje cevi: | Ø 10–40 mm (3/8"–1 1/4") |
| Masa: | 2,5 kg |
| Mere: | 273 × 260 × 75 mm |
| Obratovalna temperatura: | -10 °C do +60 °C |
| Vsebina paketa: | kovček, akumulator, hitri polnilnik |
| Stiskalne čeljusti: | niso priložene |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.