Električni predgrelnik/dogrelnik zraka EKA NIS 160-1,2-1F IVAR.EKA-NIS – 1,2 kW, 0–10 V IVAR.EKA-NIS
Koda: IVACC003804Sorodni izdelki
Podroben opis izdelka
EKA NIS 160-1,2-1F (tip IVAR.EKA-NIS, šifra IVACC003804) je električni grelnik zraka, namenjen prezračevalnim sistemom z enotami SMARTY. Glede na mesto vgradnje deluje kot predgrelnik ali dogrelnik svežega zraka. Moč 1,2 kW se regulira z zunanjim analognim signalom 0–10 V, napajanje je enofazno 230 V.
Zgradba
- ohišje iz aluminij-cink jekla, odpornega na visoke temperature, stopnja zaščite IP 44
- gumijasto tesnilo za priključitev na kanal premera 160 mm, skupna dolžina 370 mm
- cevi izmenjevalnika iz nerjavnega jekla AISI 304
- dva varnostna termostata – s samodejno ponastavitvijo (50 °C) in z ročno ponastavitvijo (100 °C)
- vijačne sponke za enostavno priključitev
Pogoji vgradnje
- hitrost zraka v kanalu najmanj 1,5 m/s, najmanjši pretok 110 m³/h
- najvišja temperatura zraka na izstopu 50 °C
- vodoravna vgradnja s priključno omarico zgoraj ali ob strani, navpično samo pri toku zraka navzgor
- samo v notranjosti stavb in za čist zrak, ne v eksplozivnem okolju ali okolju z agresivnimi snovmi
Priključitev na električno omrežje sme izvesti samo oseba z elektrotehnično usposobljenostjo. V tokokrogu mora biti inštalacijski odklopnik karakteristike B, ki ni priložen.
Tehnični podatki
| Šifra | IVACC003804 |
| Proizvajalec | IVAR |
| Tip | IVAR.EKA-NIS |
| Oznaka | EKA NIS 160-1,2-1F |
| Moč | 1,2 kW |
| Napajanje | 1~230 V / 50 Hz |
| Krmiljenje | zunanji signal 0–10 V |
| Premer kanala | 160 mm |
| Najmanjši pretok zraka | 110 m³/h |
| Najvišja izstopna temperatura | 50 °C |
| Stopnja zaščite | IP 44 |
| Skupna dolžina | 370 mm |
| Namen | prezračevalne enote SMARTY |
Pogosta vprašanja
Za katere prezračevalne enote je grelnik namenjen?
Po navedbah proizvajalca je namenjen prezračevalnim enotam SMARTY in se priključi na kanal premera 160 mm.
Kako se krmili moč grelnika?
Moč se regulira z zunanjim analognim signalom 0–10 V (0–100 %). Grelnik pri tem potrebuje hitrost zraka vsaj 1,5 m/s.
Kaj storiti, ko grelnik preneha greti?
Če se je sprožil varnostni termostat z ročno ponastavitvijo, je treba najprej ugotoviti in odpraviti vzrok pregretja, nato pa pritisniti tipko RESET na ohišju. Posegi v elektroinštalacijo so naloga strokovnjaka.
Ali grelnik potrebuje vzdrževanje?
Posebnega vzdrževanja ne potrebuje, enkrat letno pa je treba preveriti električni priključek.
Dodatni parametri
| Kategorija: | dodatna oprema za enote IVAR.PROFI-AIR |
|---|---|
| Garancija: | 24 |
| Šifra: | IVACC003804 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.EKA-NIS |
| Oznaka: | EKA NIS 160-1,2-1F |
| Moč: | 1,2 kW |
| Napajanje: | 1~230 V / 50 Hz |
| Krmiljenje: | zunanji signal 0–10 V |
| Premer kanala: | 160 mm |
| Najmanjši pretok zraka: | 110 m³/h |
| Najvišja izstopna temperatura: | 50 °C |
| Stopnja zaščite: | IP 44 |
| Skupna dolžina: | 370 mm |
| Namen: | prezračevalne enote SMARTY |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.