Digitalni solarni regulator TDC SMART BASIC – IVAR.TDC, WiFi, 2× Pt1000
Koda: S11205Podroben opis izdelka
Regulator TDC SMART BASIC (koda S11205, tip IVAR.TDC) krmili solarno ogrevanje glede na temperature, ki jih merijo tipala Pt1000. Ponuja 9 vnaprej programiranih hidravličnih shem, meni v češčini in čarovnika za prvi zagon.
Upravljanje in povezava
- barvni zaslon TFT na dotik 2,4" (240 × 320 slikovnih pik), kapacitivno upravljanje
- povezava z internetom prek WiFi 2,4 GHz (IEEE 802.11 b/g/n, WPA2/WPA3)
- upravljanje v aplikaciji SOREL Connect in oddaljeni dostop tudi za servis
Vhodi in izhodi
- 3 vhodi za tipala Pt1000, merilno območje od -50 °C do 300 °C
- 1 mehanski preklopni rele (460 VA pri AC1 / 460 W pri AC3) za krmiljenje obtočne črpalke 230 V
- 1 izhod 0-10 V/PWM za krmiljenje črpalke s signalom
- v kompletu 2 temperaturni tipali Pt1000
Vgradnja
Regulator v tridelnem ohišju iz plastike ABS (116 × 86 × 37 mm) se montira na steno ali v montažno dozo, v suhem prostoru pri 0–40 °C. Kabel tipala kolektorja mora biti krajši od 30 m, kabli ostalih tipal Pt1000 pa krajši od 10 m. Električno priključitev in zagon mora opraviti usposobljen strokovnjak.
Tehnični podatki
| Koda | S11205 |
| Znamka | IVAR |
| Tip | IVAR.TDC |
| Napajalna napetost | 100–240 V AC, 50/60 Hz |
| Poraba moči | 0,5–3 W (pripravljenost 0,5 W) |
| Stopnja zaščite | IP40 |
| Vhodi | 3 × Pt1000 (-50 °C do 300 °C) |
| Izhodi | 1 × rele 230 V, 1 × 0-10 V/PWM |
| Zaslon | barvni TFT na dotik 2,4" |
| Povezava | WiFi 2,4 GHz, aplikacija SOREL Connect |
| Hidravlične sheme | 9 |
| Tipala v kompletu | 2 × Pt1000 |
| Mere | 116 × 86 × 37 mm |
| Notranja varovalka | 2 A počasna, 250 V |
Pogosta vprašanja
Ali lahko regulator upravljam na daljavo?
Da. Regulator se poveže z internetom prek WiFi in se upravlja v aplikaciji SOREL Connect; oddaljeni dostop omogoča tudi servisni poseg.
Koliko tipal je v kompletu in koliko jih lahko priključim?
V kompletu sta 2 tipali Pt1000. Regulator ima 3 vhode za tipala Pt1000.
Kako regulator krmili obtočno črpalko?
Prek izhodnega releja 230 V. Za črpalke s krmilnim signalom ima dodatno izhod 0-10 V/PWM.
Kaj je v paketu poleg regulatorja?
Trije vijaki 3,5 × 35 mm z vložki S6 za montažo na steno, 4 objemke za razbremenitev kablov z 8 vijaki, rezervna varovalka 2AT in navodila.
Dodatni parametri
| Kategorija: | črpalne enote in regulacije |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | regulacija / senzor |
| Koda: | S11205 |
| Znamka: | IVAR |
| Tip: | IVAR.TDC |
| Napajalna napetost: | 100–240 V AC, 50/60 Hz |
| Poraba moči: | 0,5–3 W (pripravljenost 0,5 W) |
| Stopnja zaščite: | IP40 |
| Vhodi: | 3 × Pt1000 (-50 °C do 300 °C) |
| Izhodi: | 1 × rele 230 V, 1 × 0-10 V/PWM |
| Zaslon: | barvni TFT na dotik 2,4" |
| Povezava: | WiFi 2,4 GHz, aplikacija SOREL Connect |
| Hidravlične sheme: | 9 |
| Tipala v kompletu: | 2 × Pt1000 |
| Mere: | 116 × 86 × 37 mm |
| Notranja varovalka: | 2 A počasna, 250 V |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.