Digitalni regulator TDC SMART BASIC za solarne sisteme – IVAR.TDC, WiFi, 2× Pt1000
Koda: S11205Podroben opis izdelka
Regulator TDC SMART BASIC (koda S11205, tip IVAR.TDC) upravlja solarno ogrevanje glede na temperature, ki jih merijo senzorji Pt1000. Ponuja 9 predprogramiranih hidravličnih shem, češko menijsko izbiro in vodnik, ki pomaga pri prvem zagonu.
Upravljanje in priključitev
- barvni TFT zaslon na dotik 2,4" (240 × 320 pik) s kapacitivnim upravljanjem
- priključitev na internet preko WiFi 2,4 GHz (IEEE 802.11 b/g/n, WPA2/WPA3)
- upravljanje v aplikaciji SOREL Connect in oddaljeni dostop tudi za servis
Vhodi in izhodi
- 3 vhodi za senzorje Pt1000 s merilnim območjem -50 °C do 300 °C
- 1 mehansko preklopno rele (460 VA pri AC1 / 460 W pri AC3) za krmiljenje obtočne črpalke 230 V
- 1 izhod 0-10 V/PWM za krmiljenje črpalke s signalom
- V kompletu 2 temperaturna tipala Pt1000
Vgradnja
Regulator v trodelnem ohišju iz ABS plastike (116 × 86 × 37 mm) se montira na steno ali v montažno škatlo v suhem okolju s temperaturo 0–40 °C. Kabel senzorja kolektorja mora biti krajši od 30 m, ostalih senzorjev Pt1000 krajši od 10 m. Električno priključevanje in zagon mora izvesti kvalificirani strokovnjak.
Tehnični parametri
| Koda | S11205 |
| Blagovna znamka | IVAR |
| Vrsta | IVAR.TDC |
| Napajalna napetost | 100–240 V AC, 50/60 Hz |
| Moč | 0,5–3 W (varnostni način 0,5 W) |
| Stopnja zaščite | IP40 |
| Vhodi | 3 × Pt1000 (-50 °C do 300 °C) |
| Izhodi | 1 × relej 230 V, 1 × 0-10 V/PWM |
| Zaslon | barvni dotik TFT 2,4" |
| Priključitev | WiFi 2,4 GHz, aplikacija SOREL Connect |
| Hidravlične sheme | 9 |
| Senzorji v kompletu | 2 × Pt1000 |
| Velikosti | 116 × 86 × 37 mm |
| Notranja varovalka | 2 A, počasna, 250 V |
Pogosta vprašanja
Ali je regulator mogoče upravljati na daljavo?
Da. Regulator se preko WiFi poveže na internet in upravlja v aplikaciji SOREL Connect; daljinski dostop omogoča tudi servisni poseg.
Koliko senzorjev je v paketu in koliko jih lahko priključim?
V dobavi sta 2 senzorja Pt1000. Regulator ima 3 vhoda za senzorje Pt1000.
Kako regulator upravlja obtočno črpalko?
Preko izhodnega releja 230 V. Za črpalke z upravljalnim signalom ima dodatno izhod 0-10 V/PWM.
Kaj je v paketu poleg regulatorja?
Tri vijaki 3,5 × 35 mm z mozniki S6 za montažo na steno, 4 pritrdilne sponke za razbremenitev vleka kablov z 8 vijaki, rezervna varovalka 2AT in navodilo.
Dodatni parametri
| Kategorija: | črpalne enote in regulacije |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | S11205 |
| Znamka: | IVAR |
| Tip: | IVAR.TDC |
| Napajalna napetost: | 100–240 V AC, 50/60 Hz |
| Poraba moči: | 0,5–3 W (pripravljenost 0,5 W) |
| Stopnja zaščite: | IP40 |
| Vhodi: | 3 × Pt1000 (-50 °C do 300 °C) |
| Izhodi: | 1 × rele 230 V, 1 × 0-10 V/PWM |
| Zaslon: | barvni TFT na dotik 2,4" |
| Povezava: | WiFi 2,4 GHz, aplikacija SOREL Connect |
| Hidravlične sheme: | 9 |
| Tipala v kompletu: | 2 × Pt1000 |
| Mere: | 116 × 86 × 37 mm |
| Notranja varovalka: | 2 A počasna, 250 V |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.