Prešita delovna jakna IVAR.H59-B – velikost XL, modra IVAR.H59-B
Koda: H5994XLSorodni izdelki
Podroben opis izdelka
Šifra H5994XL označuje moško prešito delovno jakno IVAR.H59-B v velikosti XL, v modri barvi. Zaradi toplotnega polnila je primerna za delo v hladnejšem okolju, kjer je treba ostati na toplem in se hkrati prosto gibati.
Material in zgradba
- trislojna zgradba materiala
- zunanji sloj TABIFLEX®: 88 % najlon in 12 % spandeks
- toplotno polnilo iz 100 % poliestra s ploskovno maso 410 g/m²
- prešita izvedba
Kroj
Jakna ima ergonomski in funkcionalen kroj, zasnovan tako, da podpira svobodo gibanja – na primer pri sklanjanju ali delu z dvignjenimi rokami. Spandeks v zunanjem materialu ji daje prožnost.
Velikost XL
Ta izdelek je v velikosti XL. Isti model je na voljo tudi v velikostih M (H5994M), L (H5994L), XXL (H5994XXL), XXXL (H5994XXXL) in XXXXL (H5994XXXXL) – vsaka velikost ima svojo šifro.
V enaki modri barvi in v velikostih od M do XXXXL je na voljo tudi funkcionalni delovni pulover IVAR.H97-M.
Tehnični podatki
| Šifra | H5994XL |
| Proizvajalec | IVAR |
| Tip | IVAR.H59-B |
| Vrsta | moška prešita delovna jakna |
| Velikost | XL |
| Barva | modra |
| Zunanji material | 88 % najlon, 12 % spandeks (TABIFLEX®) |
| Toplotno polnilo | 100 % poliester, 410 g/m² |
| Zgradba materiala | trislojna |
| Razpon velikosti | M, L, XL, XXL, XXXL, XXXXL |
Pogosta vprašanja
Iz katerega materiala je jakna H5994XL?
Zunanji material TABIFLEX® sestavljata 88 % najlon in 12 % spandeks, toplotno polnilo pa je iz 100 % poliestra s ploskovno maso 410 g/m². Skupaj gre za trislojni material.
Katera velikost je ta šifra in katere velikosti so še na voljo?
Šifra H5994XL je velikost XL. Jakna IVAR.H59-B se izdeluje v velikostih M, L, XL, XXL, XXXL in XXXXL, vsaka s svojo šifro.
Ali jakna med delom omejuje gibanje?
Ne, ergonomski in funkcionalen kroj je zasnovan za svobodo gibanja. Dodatno prožnost zagotavlja spandeks v zunanjem materialu.
Ali je to moška ali ženska jakna?
Proizvajalec model IVAR.H59-B navaja kot moško prešito jakno. Dobavlja se v modri barvi.
Dodatni parametri
| Kategorija: | delovna oblačila |
|---|---|
| Garancija: | 24 |
| Šifra: | H5994XL |
| Proizvajalec: | IVAR |
| Tip: | IVAR.H59-B |
| Vrsta: | moška prešita delovna jakna |
| Velikost: | XL |
| Barva: | modra |
| Zunanji material: | 88 % najlon, 12 % spandeks (TABIFLEX®) |
| Toplotno polnilo: | 100 % poliester, 410 g/m² |
| Zgradba materiala: | trislojna |
| Razpon velikosti: | M, L, XL, XXL, XXXL, XXXXL |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.