Prešit podložen delovni telovnik IVAR.H58-V – velikost XXL, moder IVAR.H58-V
Koda: H5881XXLSorodni izdelki
Podroben opis izdelka
Koda H5881XXL označuje prešit delovni telovnik IVAR.H58-V v velikosti XXL, modre barve. Ker je podložen, telovnik služi kot dodatna topla plast pri delu v hladnejših prostorih ali pri montažah, kjer se je treba veliko gibati.
Sestava materiala
- trislojni material
- zunanja plast: 88 % najlon, 12 % spandeks
- polnilo (toplotna izolacija): 100 % poliester, 410 g/m²
- prešita izvedba
Udobje pri delu
Kroj telovnika je ergonomski in funkcionalen – sledi gibom telesa in ne ovira pri sklanjanju, obračanju ali iztegovanju. Spandeks v zunanjem materialu daje tkanini elastičnost. Ker gre za telovnik, ostanejo roke proste za delo z orodjem.
Velikost XXL in druge velikosti
Ta koda ustreza velikosti XXL. Telovnik IVAR.H58-V je na voljo v petih velikostih: M (H5881M), L (H5881L), XL (H5881XL), XXL (H5881XXL) in XXXL (H5881XXXL). Pri naročilu izberite kodo glede na potrebno velikost.
Iz iste linije modrih delovnih oblačil IVAR sta na voljo tudi prešita delovna jakna IVAR.H59-B in funkcionalni delovni pulover IVAR.H97-M.
Tehnični podatki
| Koda | H5881XXL |
| Proizvajalec | IVAR |
| Tip | IVAR.H58-V |
| Vrsta | prešit podložen delovni telovnik |
| Velikost | XXL |
| Barva | modra |
| Zunanji material | 88 % najlon, 12 % spandeks |
| Podloga | 100 % poliester, 410 g/m² |
| Zgradba materiala | trislojna |
| Razpoložljive velikosti | M, L, XL, XXL, XXXL |
| Pakiranje | 1 kos |
Pogosta vprašanja
Iz katerega materiala je telovnik H5881XXL?
Zunanji material sestavljata 88 % najlona in 12 % spandeksa, polnilo pa je iz 100 % poliestra z gramaturo 410 g/m². Skupaj gre za trislojni prešit material.
Katero velikost označuje koda H5881XXL?
Koda H5881XXL je velikost XXL. Druge velikosti istega telovnika IVAR.H58-V imajo lastne kode: H5881M, H5881L, H5881XL in H5881XXXL.
Ali telovnik ovira gibanje pri delu?
Ne, ergonomski in funkcionalni kroj podpira svobodo gibanja, 12 % spandeksa v zunanjem materialu pa naredi tkanino elastično.
S katerimi drugimi delovnimi oblačili IVAR lahko kombiniram telovnik?
V enaki modri barvi IVAR ponuja tudi prešito delovno jakno IVAR.H59-B in funkcionalni delovni pulover IVAR.H97-M.
Dodatni parametri
| Kategorija: | delovna oblačila |
|---|---|
| Garancija: | 24 |
| Koda: | H5881XXL |
| Proizvajalec: | IVAR |
| Tip: | IVAR.H58-V |
| Vrsta: | prešit podložen delovni telovnik |
| Velikost: | XXL |
| Barva: | modra |
| Zunanji material: | 88 % najlon, 12 % spandeks |
| Podloga: | 100 % poliester, 410 g/m² |
| Zgradba materiala: | trislojna |
| Razpoložljive velikosti: | M, L, XL, XXL, XXXL |
| Pakiranje: | 1 kos |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.