Decentralizirana prezračevalna enota z rekuperacijo in dezinfekcijo zraka IVAR.RHINOCOMFORT 3 – AKCIJA
Koda: IVAP19997Podroben opis izdelka
IVAR.RHINOCOMFORT 3 (koda IVAP19997) združuje prezračevanje z rekuperacijo toplote in sanitacijo dovedenega zraka. Enota brez odpiranja oken nenehno izmenjuje zrak v prostoru, regenerativni keramični izmenjevalnik vrne v prostor do 90 % toplote odvedenega zraka, filter ISO Coarse pa zadržuje nečistoče. Namenjena je prostorom s površino do 55 m².
Sanitacija zraka
Zmogljive UV-C in UV-A LED v kombinaciji s fotokatalitičnim procesom brez nastajanja ozona razgrajujejo škodljive snovi v dovedenem zunanjem zraku. Po vklopu funkcije sanitacije v aplikaciji lahko enota po navedbah proizvajalca odstrani do 99,6 % virusov in bakterij ter zmanjša koncentracijo PM2,5, PM10 in hlapnih organskih spojin (VOC).
Tehnični podatki
- pretok 15 m³/h v nočnem načinu, 30 / 50 / 75 m³/h na V1–V3, boost 100 m³/h
- moč od 2,5 do 20 W, hrup na 3 m od 15,0 do 31,5 dB(A) na V1–V3
- cev Ø 160 mm, napajanje 110–230 V, 50/60 Hz
- zaščita IPX4, delovanje pri -20 °C do +50 °C
- Wi-Fi 2,4 GHz in Bluetooth 5.0, posodobitev programske opreme prek aplikacije
Upravljanje in vgradnja
Senzorji temperature, vlage, kakovosti zraka (eCO2) in svetlobe krmilijo samodejni način; ročno so na voljo hitrosti V1–V3, nočni način, začasni dovod ali odvod za 60 minut in izmenični pretok. Aplikacija Intelliclima+ ponuja tedensko programiranje, poleti pa prosto hlajenje FREE-COOLING. Enota se vgradi v zunanjo steno s teleskopsko cevjo ali v kanal do 3 m (2,5 m z enim kolenom). Vgradnjo mora izvesti usposobljena oseba.
Tehnični podatki
| Koda | IVAP19997 |
| Znamka | IVAR |
| Tip | IVAR.RHINOCOMFORT 3 |
| Premer cevi | 160 mm |
| Pretok zraka | 15–100 m³/h |
| Izkoristek rekuperacije | do 90 % |
| Sanitacija zraka | UV-C in UV-A LED s fotokatalizo, brez ozona |
| Moč | 2,5–20 W |
| Napajanje | 110–230 V, 50/60 Hz |
| Zaščita | IPX4 |
| Obratovalna temperatura | -20 °C do +50 °C |
| Filter | ISO Coarse |
| Upravljanje | aplikacija Intelliclima+ (Wi-Fi, Bluetooth) |
| Površina | do 55 m² |
Pogosta vprašanja
V čem se RHINOCOMFORT 3 razlikuje od ECOCOMFORT 3?
Ima enake prezračevalne podatke, dodatno pa vsebuje sistem sanitacije dovedenega zraka z UV-C in UV-A LED ter fotokatalizo. Sanitacija se vklopi in izklopi v aplikaciji.
Ali pri dezinfekciji nastaja ozon?
Ne, po navedbah proizvajalca fotokatalitični proces ne proizvaja ozona. Škodljive snovi v dovedenem zraku razgradi v neškodljive.
Katera dodatna oprema je na voljo za enoto?
Nadomestni filter ISO Coarse IVAP1984, izolacijska plošča IVAP1985, pokrov rešetke za zaščito pred dežjem IVAP1613 in zunanji komplet za zmanjšanje hrupa IVAP19881.
Dodatni parametri
| Kategorija: | decentralne prezračevalne enote in dodatna oprema |
|---|---|
| Garancija: | 2 leti |
| Koda: | IVAP19997 |
| Znamka: | IVAR |
| Tip: | IVAR.RHINOCOMFORT 3 |
| Premer cevi: | 160 mm |
| Pretok zraka: | 15–100 m³/h |
| Izkoristek rekuperacije: | do 90 % |
| Sanitacija zraka: | UV-C in UV-A LED s fotokatalizo, brez ozona |
| Moč: | 2,5–20 W |
| Napajanje: | 110–230 V, 50/60 Hz |
| Zaščita: | IPX4 |
| Obratovalna temperatura: | -20 °C do +50 °C |
| Filter: | ISO Coarse |
| Upravljanje: | aplikacija Intelliclima+ (Wi-Fi, Bluetooth) |
| Površina: | do 55 m² |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.