Infrardeči daljinski upravljalnik IVAR.DO IR za IR konzolo na ventilatorskih konvektorjih ECI in ECI-DC – AKCIJA IVAR.DO IR
Koda: I07916982Sorodni izdelki
Podroben opis izdelka
IVAR.DO IR je infrardeči daljinski upravljalnik za ventilatorske konvektorje (fancoile) ECI in ECI-DC. Signal sprejema konzola IVAR.IR, ki se vgradi v rešetko konvektorja – brez nje upravljalnik z napravo ne komunicira. Za konvektorje ECI je namenjena konzola s kodo I07916992, za ECI-DC pa konzola s kodo I07916997. Na konvektor je treba namestiti tudi tipalo temperature zraka v prostoru IVAR.LAS (I07916910).
Kaj upravljalnik nastavi
- želeno sobno temperaturo v območju 10–30 °C
- hitrost ventilatorja
- način ogrevanja ali hlajenja (prezračevanja in razvlaževanja ni mogoče izbrati)
- nočni način Ekonomy – pri hlajenju nastavljeno temperaturo standardno zviša za 6 °C, pri ogrevanju jo zniža za 6 °C
- način pripravljenosti Stand-by (vklop/izklop)
Ob vsakem pritisku tipke upravljalnik pošlje konvektorju celotno trenutno nastavitev, zato se izklopljena naprava v dosegu signala ponovno zažene. Stanje delovanja kažejo lučke LED: zelena pri hlajenju, rdeča pri ogrevanju (utripanje pomeni, da je ventil odprt in naprava trenutno hladi ali greje), rumena z zvočnim signalom javlja alarm.
Doseg infrardečega signala je 8–10 m, v paketu sta 2 bateriji 1,5 V. Montažo konzole in električno priključitev konvektorja mora opraviti oseba z elektrotehnično usposobljenostjo. Garancija je 24 mesecev.
Tehnični podatki
| Koda | I07916982 |
| Proizvajalec | IVAR |
| Tip | IVAR.DO IR |
| Namen | konzola IVAR.IR na konvektorjih ECI in ECI-DC |
| Prenos signala | infrardeči |
| Doseg signala | 8–10 m |
| Območje nastavitve temperature | 10–30 °C |
| Napajanje | 2 bateriji 1,5 V (priloženi) |
| Načini delovanja | ogrevanje, hlajenje, Ekonomy, Stand-by |
Pogosta vprašanja
Ali upravljalnik deluje s konvektorjem ECI brez dodatne opreme?
Ne, na konvektor je treba namestiti konzolo IVAR.IR, ki sprejema signal (za ECI koda I07916992, za ECI-DC I07916997), in sobno tipalo IVAR.LAS.
Ali so baterije priložene?
Da, upravljalnik se dobavlja z dvema baterijama 1,5 V.
Na kakšno razdaljo upravljalnik deluje?
Največji doseg infrardečega signala je 8 do 10 m.
Zakaj konvektor po pritisku tipke dvakrat zapiska?
Na upravljalniku je bila izbrana funkcija, ki je konvektor ne podpira – prezračevanje ali razvlaževanje. Izbrati je mogoče samo ogrevanje in hlajenje.
Dodatni parametri
| Kategorija: | Dodatna oprema za ventilatorski konvektor |
|---|---|
| Garancija: | 24 |
| Koda: | I07916982 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.DO IR |
| Namen: | konzola IVAR.IR na konvektorjih ECI in ECI-DC |
| Prenos signala: | infrardeči |
| Doseg signala: | 8–10 m |
| Območje nastavitve temperature: | 10–30 °C |
| Napajanje: | 2 bateriji 1,5 V (priloženi) |
| Načini delovanja: | ogrevanje, hlajenje, Ekonomy, Stand-by |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.