Aksialni ventilator IVAR.ASPIRANTE z visoko zmogljivostjo – za cev Ø 80/100/120 mm, 230 V
Koda: IVAP3100Podroben opis izdelka
Ventilator IVAR.ASPIRANTE (koda IVAP3100) je namenjen občasnemu ali stalnemu odsesavanju zraka iz kopalnic, kuhinj in tehničnih prostorov v stanovanjih, hišah in poslovnih prostorih. Zrak izpihuje neposredno ven skozi steno ali v prezračevalni jašek, s kompletom IVAP0900 pa ga je mogoče vgraditi tudi v okno ali stekleno površino.
Lastnosti
- priključitev na cev Ø 80, 100 ali 120 mm – trije adapterji in povratna loputa so v kompletu
- pretok zraka 55–130 m³/h glede na premer cevi
- ohišje iz udarno odporne plastike ABS, obstojne proti UV-sevanju
- indukcijski motor s toplotno varovalko, razred izolacije F, dvojna izolacija (razred II)
- zaščita IPX4, temperatura zraka največ 45 °C, napajanje 230 V / 50 Hz
- skrajšani priključni nastavek omogoča priklop kolena tik za ventilatorjem
Možnosti dopolnitve
Osnovno izvedbo je mogoče naknadno opremiti s časovnim relejem IVAR.ASPIRTIMER N (IVAP0904) ali s higrostatom s časovnim relejem IVAR.ASPIRHYGRO (IVAP0906). Če želite te funkcije neposredno v ventilatorju, izberite različico ASPIRANTE T (IVAP3102) ali ASPIRANTE HT (IVAP3104).
Ventilator montirajte na steno ali strop vsaj 2,3 m nad tlemi in ga priključite prek dvopolnega stikala z razmikom kontaktov najmanj 3 mm. Ne sme izpihovati v kanal, po katerem se odvajajo dimni plini plinske naprave. Električno priključitev prepustite strokovnjaku.
Tehnični podatki
| Koda | IVAP3100 |
| Znamka | IVAR |
| Tip | IVAR.ASPIRANTE |
| Izvedba | aksialni odvodni ventilator |
| Različica | osnovna |
| Premer cevi | Ø 80 / 100 / 120 mm (adapterji v kompletu) |
| Pretok zraka | 55–130 m³/h glede na premer cevi |
| Napajanje | 230 V / 50 Hz |
| Zaščita | IPX4 |
| Največja temperatura zraka | 45 °C |
| Material ohišja | ABS, udarno odporen, UV-obstojen |
| Motor | indukcijski s toplotno varovalko, razred izolacije F |
| Dodatna oprema | IVAR.ASPIRTIMER N (IVAP0904), IVAR.ASPIRHYGRO (IVAP0906) |
Pogosta vprašanja
Za kateri premer cevi je ventilator primeren?
Za cevi Ø 80, 100 ali 120 mm. Ustrezni adapterji in povratna loputa so v kompletu; adapter za Ø 90 mm je mogoče naročiti posebej.
Ali je ventilator mogoče vgraditi v okno?
Da, s kompletom za vgradnjo v okno ali stekleno površino (koda IVAP0900), ki ustreza vsem premerom. Steklo je lahko debelo največ 15 mm.
Ali lahko osnovnemu modelu dodam časovni rele ali higrostat?
Da. Za model IVAP3100 sta namenjena časovni rele IVAR.ASPIRTIMER N (IVAP0904) in higrostat s časovnim relejem IVAR.ASPIRHYGRO (IVAP0906).
Kako se ventilator čisti?
Po odklopu z električnega omrežja umazane dele umijte z vodo in nevtralnim čistilom. Električnih delov nikoli ne potapljajte v vodo.
Dodatni parametri
| Kategorija: | prisilno prezračevanje z rekuperacijo |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | cevovod in fitingi |
| Koda: | IVAP3100 |
| Znamka: | IVAR |
| Tip: | IVAR.ASPIRANTE |
| Izvedba: | aksialni odvodni ventilator |
| Različica: | osnovna |
| Premer cevi: | Ø 80 / 100 / 120 mm (adapterji v kompletu) |
| Pretok zraka: | 55–130 m³/h glede na premer cevi |
| Napajanje: | 230 V / 50 Hz |
| Zaščita: | IPX4 |
| Največja temperatura zraka: | 45 °C |
| Material ohišja: | ABS, udarno odporen, UV-obstojen |
| Motor: | indukcijski s toplotno varovalko, razred izolacije F |
| Dodatna oprema: | IVAR.ASPIRTIMER N (IVAP0904), IVAR.ASPIRHYGRO (IVAP0906) |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.