Akumulatorska elektrohidravlična stiskalnica IVAR.ACO 32 – 18 V / 5,0 Ah, 32 kN, za jeklene sisteme do 54 mm
Koda: 5196980-50Podroben opis izdelka
IVAR.ACO 32 (koda 5196980-50) je elektrohidravlična stiskalna naprava z napajanjem iz akumulatorja 18 V / 5,0 Ah, namenjena napeljavam sistemov iz ogljikovega in nerjavnega jekla z dimenzijami stiskanja do 54 mm.
Zmogljivost in napajanje
- sila stiskanja 32 kN, hod bata 40 mm, moč 450 W, prisilni hod
- akumulator Milwaukee M18 18 V / 5,0 Ah; uporabne so vse kapacitete akumulatorjev Milwaukee M18
- do 250 ciklov stiskanja na polnjenje glede na material in dimenzijo, polnjenje 45 do 75 minut
Upravljanje in varnost
- glava, vrtljiva za 180°, in druga sprožilna tipka za utesnjene prostore
- LED svetlobni obroč s 27 diodami osvetli mesto stiskanja in z barvo pokaže, ali je bil dosežen pravilen tlak stiskanja
- zaslon, odporen proti praskam, s stanjem naprave, sporočili o napakah, prikazom vzdrževanja in stanjem akumulatorja
- prenos podatkov prek Bluetootha v mobilno aplikacijo: zaklepanje, nastavitve, poročilo z gradbišča, krivulje stiskanja
- zaščita pred krajo z zaklepanjem s kombinacijo tipk ali prek aplikacije
Čeljusti in vzdrževanje
Stiskalnica deluje s čeljustmi IVAR.PB2-M15 do M35 in IVAR.PB2-B16 do B32, za dimenzije M42 do M54 pa s čeljustmi IVAR.PB4; tehnični list zanje navaja vmesno čeljust IVAR.ZB 203-M. Senzor tlaka stiskanja nenehno spremlja tlak in zmanjšuje obrabo, zato redni servis vsaki dve leti ni potreben. Masa brez akumulatorja 2,3 kg, mere 387 × 75 × 111 mm.
Tehnični podatki
| Koda | 5196980-50 |
| Znamka | IVAR |
| Tip | IVAR.ACO 32 |
| Akumulator | Milwaukee M18, 18 V / 5,0 Ah |
| Sila stiskanja | 32 kN |
| Hod bata | 40 mm |
| Moč | 450 W |
| Dimenzije stiskanja (jeklo) | do 54 mm |
| Združljive čeljusti | IVAR.PB2-M15–M35, IVAR.PB2-B16–B32, IVAR.PB4-M42–M54 |
| Zmogljivost akumulatorja | do 250 ciklov stiskanja |
| Čas polnjenja | 45–75 min |
| Masa brez akumulatorja | 2,3 kg |
| Mere (D × Š × V) | 387 × 75 × 111 mm |
Pogosta vprašanja
Katere čeljusti uporablja stiskalnica?
Čeljusti IVAR.PB2-M15 do M35 in IVAR.PB2-B16 do B32, za večje dimenzije M42 do M54 pa čeljusti IVAR.PB4. Izberejo se glede na sistem in dimenzijo.
Koliko stiskov omogoča eno polnjenje?
Do 250 ciklov stiskanja glede na material, dimenzijo in kapaciteto akumulatorja. Polnjenje traja od 45 do 75 minut.
Ali stiskalnica potrebuje redni servis?
Redni servis vsaki dve leti ni potreben, ker senzor tlaka stiskanja nenehno spremlja tlak in zmanjšuje obrabo. Stanje naprave in prikaz vzdrževanja sta vidna na zaslonu.
Dodatni parametri
| Kategorija: | elektrohidravlične stiskalnice |
|---|---|
| Garancija: | 2 leti |
| Teža: | 2.3 kg |
| Vrsta: | nadomestni deli za stiskalnico |
| Koda: | 5196980-50 |
| Znamka: | IVAR |
| Tip: | IVAR.ACO 32 |
| Akumulator: | Milwaukee M18, 18 V / 5,0 Ah |
| Sila stiskanja: | 32 kN |
| Hod bata: | 40 mm |
| Moč: | 450 W |
| Dimenzije stiskanja (jeklo): | do 54 mm |
| Združljive čeljusti: | IVAR.PB2-M15–M35, IVAR.PB2-B16–B32, IVAR.PB4-M42–M54 |
| Zmogljivost akumulatorja: | do 250 ciklov stiskanja |
| Čas polnjenja: | 45–75 min |
| Masa brez akumulatorja: | 2,3 kg |
| Mere (D × Š × V): | 387 × 75 × 111 mm |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.