Električni akumulacijski grelnik vode IVAR.SE80 – 80 l, 2 kW, magnezijeva anoda IVAR.SE80
Koda: SE0080C5VRSorodni izdelki
Podroben opis izdelka
IVAR.SE80 (šifra SE0080C5VR) je električni akumulacijski grelnik vode s prostornino 80 l, ki se navpično obesi na steno. Vodo segreva grelec z močjo 2000 W pri napetosti 230 V, temperaturo pa uporabnik nastavi ročno z gumbom na plastičnem pokrovu.
Lastnosti
- jekleni hranilnik z notranjo površinsko zaščito SMALGLASS
- magnezijeva anoda poveča zaščito pred blodečimi tokovi
- toplotna izolacija iz ekološke poliuretanske pene brez CFC
- najvišja obratovalna temperatura 65 °C, najvišji obratovalni tlak 8 bar
- čas segrevanja pri ΔT 50 K približno 232 minut, okvirna poraba 1,32 kWh v 24 h (50 °C)
- zaščita pred vlago IPX4, energijski razred C, profil odvzema M
Vgradnja
Grelnik se obesi na dve kljuki prek montažne konzole na ohišju (kljuke in vložki, primerni za steno, niso priloženi). Priključki hladne in tople vode imajo zunanji navoj 1/2". Na dovodu hladne vode mora biti varnostni ventil – proizvajalec navaja IVAR.G 501, nastavljen na 0,7 MPa –, priporoča se tudi raztezna posoda ustrezne velikosti. V električni tokokrog spada dvopolno stikalo z razmikom kontaktov najmanj 3 mm. Vgradnjo in priključitev sme izvesti samo strokovno usposobljena oseba.
Ista serija je na voljo tudi s prostornino 100 l (IVAR.SE100) in 120 l (IVAR.SE120).
Tehnični podatki
| Šifra | SE0080C5VR |
| Proizvajalec | IVAR |
| Tip | IVAR.SE80 |
| Prostornina | 80 l |
| Moč | 2000 W |
| Napetost | 230 V |
| Najvišja obratovalna temperatura | 65 °C |
| Najvišji obratovalni tlak | 8 bar |
| Priključna mera | 1/2" zunanji navoj |
| Čas segrevanja (ΔT 50 K) | 232 min |
| Zaščita pred vlago | IPX4 |
| Energijski razred | C |
| Mere (višina × premer) | 700 × 460 mm |
| Montaža | navpično na steno |
Pogosta vprašanja
Kako pogosto je treba menjati anodo?
Po navedbah proizvajalca je treba magnezijevo anodo zamenjati vsaki 2 leti, pri tem se odstrani grelec. Enkrat letno je priporočljivo odstraniti vodni kamen z grelca.
Ali je varnostni ventil potreben?
Da, na dovodu hladne vode mora biti varnostni ventil (proizvajalec navaja IVAR.G 501, nastavljen na 0,7 MPa). Rahlo kapljanje med segrevanjem je normalno, zato se izpust ventila priključi na odtok.
Kakšna voda je primerna za grelnik?
Trdota dovodne vode ne sme presegati 2 mmol/l (11,2 °dH) in voda ne sme biti agresivna. Če pogoji niso izpolnjeni, preneha pravica do garancije.
Ali je grelnik mogoče namestiti vodoravno?
Ne, IVAR.SE80 je namenjen samo navpični montaži na steno.
Dodatni parametri
| Kategorija: | hranilniki toplote in grelniki tople vode |
|---|---|
| Garancija: | 24 |
| Šifra: | SE0080C5VR |
| Proizvajalec: | IVAR |
| Tip: | IVAR.SE80 |
| Prostornina: | 80 l |
| Moč: | 2000 W |
| Napetost: | 230 V |
| Najvišja obratovalna temperatura: | 65 °C |
| Najvišji obratovalni tlak: | 8 bar |
| Priključna mera: | 1/2" zunanji navoj |
| Čas segrevanja (ΔT 50 K): | 232 min |
| Zaščita pred vlago: | IPX4 |
| Energijski razred: | C |
| Mere (višina × premer): | 700 × 460 mm |
| Montaža: | navpično na steno |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.